Skip to main content

Pipes Tab Page

On this page the details of all pipes to be entered using the long hand form of input are entered. For each pipe in the network one line of information is entered.

The buttons on the Tool Bar for this page are:

imageebx_482209733.gif  Close - exits this screen.

imageebx_463499438.gif Show Errors.

imageebx_668880439.gif Deletes the current pipe (where the cursor is located). When selected, a form appears confirming the delete and allowing any connected discharges at the pipe nodes to also be deleted.

imageebx_1194395346.gif Add a new pipe

imageebx_-1305375886.gif Insert a new pipe

imageebx_266410437.gif Search for Pipe/Node

imageebx_1044331642.gif Copy Pipe Data - Copies the current pipe data to the clip board.

imageebx_-1436062702.gif Paste Pipe Data - Pastes the pipe data in the clip board to the current pipe.

imageebx_-402274554.gif Help on the current tab page.

imageebx_516318643.gif View Grid This allows the user to display the GRID to assist with connecting long hand form input pipes to the GRID.

A series of radio buttons for Ordering data in either Ascending, Descending or by order of pipe entry.

imageebx_2048742289.gif Display Pipes – All , Similar or Unique

imageebx_-730394014.gif Multiple Pipe Selection

All pipes must have a pipe number and both node numbers (node types are optional) and in addition must have a length and diameter entered (pipe material, HW coefficient and fittings are optional) or similar to pipe number entered. In this later case the remainder of the line is greyed out so that no data can be entered.

Note that in this screen, selecting the = sign in any column except the Pipe Number, will copy the next non-blank value immediately above to the current field.

The input items that are entered for each pipe are:

For all pipes:

Pipe No.

Node A

Type A

Node B

Type B

For copied pipes:

Similar to Pipe Note that right clicking the mouse when on this field causes a Multiple Similar Pipes form to appear allowing the entry of multiples of the current pipe.

For Unique Pipes:

Length

Diameter

Pipe Material

H.W.Coefficient or

    Surface Roughness

Standard Elbows

90 Deg Tee Branch

Other Fittings

Network This column only appears after validation

The Standard Elbows and 90 Deg Tees Branch columns are to simplify the data input i.e. they save having to pull down the selection box (which lists all the available fittings) for Other Fittings when there are just elbows or branch tees to be entered.

Above the input data table for the pipes are:

imageebx_1833171517.gif Global Change - a check box to initiate a global change for a pipe diameter or length

A check box imageebx_1833171517.gif and field for Auto pipe numbering and Increment

Fields for entering a Default Value for:

Pipe Material  - applies to any pipe where this field is blank.

H.W.Coefficient  - applies to any pipe where this field is blank.

or Surface Roughness

Standard Elbow  - the elbow type to be used for this column

90 deg Tee Branch  - the Tee type to be used for this column

imageebx_1096534808.gif Sort Network (only when network is being validated)

Note that on this screen in each column, the = sign copies data from the next entered value above.