Ranges and Trees Tab Page
On this Tab Page details of the range pipes between the Main pipes (Range Left and Range Right) and the Tree pipes (Tree Left and Tree Right) are entered. If the sprinklers in the grid are each on a dropper or riser pipe then the details of these pipes are also entered.
The buttons on the Tool Bar for this Screen are:
 Close - exits this screen.
 Show Errors.
 Adds a new line of tree pipes.
 Help on the current tab page.
 View GRID.
Range Pipes
Range Pipes are the pipes between the Main Pipes. The items of input data for each set of range pipes are:
 Distance from Last Sprinkler
 H.W.Coefficient or
    Surface Roughness
 Fittings
Tree Pipes
Tree Pipes are the outrigger pipes to the left or right of the Main Pipes. Up to five sets (lines) of tree pipes can be entered to allow for changes in pipe diameter, different fittings, etc.. The items of input data for each set of tree pipes are:
 H.W.Coefficient or
    Surface Roughness
 Fittings
Risers or Droppers
Riser or dropper pipes can be entered in one of two ways.
- They can be entered with all the sprinklers at the end of the riser/dropper at the same fixed elevation. The length of each riser/dropper will then be calculated from the difference between this elevation and the node elevation(s) of the range pipe and tree nodes as entered on the Elevation Tab Page, or
- as a fixed vertical length from the range or tree pipe to the sprinklers
The items of input data for each set of tree pipes are:
Vertical Distance for flexible risers/droppers
Riser Dropper – a radio button to indicate if the vertical pipe length is a riser or a dropperÂ
OR
Equiv. Flex Length for flexible risers/droppers
Pipe Material  Â
H.W. Coeff or
   Surface Roughness