Skip to main content

GRID Pipe Fittings

If there are any fittings on the Main Pipes, the Rising Main Pipes, the Range or Tree Pipes or the Risers and Droppers, they are entered from the selection box that appears when the right mouse is clicked imageebx_-1425478495.gif. Fittings that apply to the Sprinkler Code (as selected on the Project Tab Page and the particular pipe material) are displayed

In addition where appropriate User Defined fittings are also displayed. The latter are fitting types with the appropriate equivalent lengths entered by the User using the USER DATA Button on the Main Screen.

Normally only tees or elbows would be selected however, the complete list is displayed in case the user has an unusual requirement to add things like valves. For Range, Tree, Rising Main Pipes and Droppers, the program automatically adds a TT at each branch from the Main Pipe. Any other entered fittings on Range and Tree Pipes are added to each length of pipe between sprinklers and on Droppers/Risers, to each dropper/riser length. The normal use of other fittings for Range and Tree pipes is to add Straight Through Tees (if the particular Sprinkler Code being used stipulates an equivalent length for straight through tees), or for the last Tree Pipe, an elbow. E.g. in a Range Pipe with 5 sprinklers, if a TN is selected, this will be added to each of the four pipe sections between the sprinklers and a TN and a TT will be added to the first and last pipe connecting to the Main Pipes.

The following items are on the Tool Bar:

imageebx_463499438.gif Show Errors

Units The units of Length and Diameter currently in use.

Fitting String

 As the user enters the number of fittings and the appropriate data (length or diameter) as required, the string that is written out to the input data file is displayed here, e.g. 2GV ZAV(400) LE(40). The fittings for this particular pipe will also appear this way under other fittings ( except for the number of Standard Elbows and 90° Branch Tees) on the Pipes Tab Page.

imageebx_-1766303649.gif  Clears all entered data for this pipe.

In the selection box users can enter data in the various columns for:

 Std No - Number of Standard Fittings.

 Special Fittings - Fittings with a user entered equivalent length.

 Fittings with a different diameter .

 Unlabled Fitting with a user entered equivalent length.

In the selection list, symbols are displayed in the description of some of the fittings. These indicate the source of the data for equivalent lengths used for the particular fitting and are:

[M.H.] Municipal Hydraulics, Vancouver Canada

[G.B.] Gage Babcock, Vancouver Canada

[Crane] Crane Company Catalogue No.41

[ASC] Automatic Sprinkler Corporation of America

(SE), (TT), (AS2118), (no loss), etc.

These items (in circular brackets) indicate that the particular Code does not have values for this particular fitting and the letters within the brackets, signify the fitting or code which is used in determining the equivalent length. E.g., in NFPA the straight through Tees (TN) and (TR) are taken as the same as a long radius elbow (LE) and a short radius elbow (SE) respectively, whilst in other codes they are assumed to have (no loss). Another example is the values for the Check Alarm Mushroom which are taken from (AS2118)

At the foot of the Selection box any errors in the entered fitting data are displayed together with the current fitting string.

Select here for further information on Fitting Equivalent lengths including tables of actual values.