Skip to main content

Main Pipes Tab Page

On this Tab Page the Main pipes in the GRID are entered including the Rising Main Pipes if required.

The buttons on the Tool Bar for this Screen are:

imageebx_482209733.gif Close - exits this screen.

imageebx_463499438.gif Show Errors.

imageebx_-402274554.gif Help on the current tab page.

imageebx_516318643.gif  View GRID

The items of input data are:

 Number of Rows.

 Distance Between Rows.

Main Pipes (Left, Right and Centre)

For each set of main pipes (displayed in separate tables) that are included in the GRID:

 No.of

 Nominal Diameter

 Pipe Material

 H.W.Coefficient or

    Surface Roughness

 Fittings

Rising Main Pipes (Left, Right and Centre)

These are the pipes that connect the range pipes to the Main Pipes. Separate entry is required for each main pipe (left, right and centre). This enables the main pipes to be at different elevations. If the Range pipes are at the same elevation as the main pipe then there will be no rising main pipes and the row is left blank.

The items of input data for each set of Rising Main pipes are:

The riser pipe size

Main Pipe elevation

Fittings

Pipe Material

H.W.Coefficient or

   Surface Roughness

Fittings

Default Values

Above the input data table for the Main pipes are default values for:

Pipe Material - applies to any pipe in the column below where this field is blank including Rising Main Pipes AND to all other (range and tree) pipes in the GRID where the Material is left blank.

H.W.Coefficient or Surf Roughness - applies to any pipe in the column below where this field is blank including Rising Main Pipes AND to all other (range and tree) pipes in the GRID where the H.W.Coefficient or Surface Roughness is left blank.