Surf Roughness - Mist Systems
The absolute roughness of the pipe for use in the friction factor formula when using the Darcy Weisbach method. Typical values are:
| Â | Â AS4587 | NFPA750 | ||||
| Material | mm | Source | HW | mm | Source | HW |
| Copper | 0.0015 | AS4587 | 150 | 0.0015 | NFPA750 | 150 |
| Stainless Steel Pipe | 0.045 | AS4587 | 130 | 0.045 | NFPA750 | 140 |
| Stainless Steel Tube | 0.0015 | AS4587 | 150 | 0.0009 | NFPA750 | 160 |
The Surface Roughness is entered in a number of places:
·   a default value may be entered above the Surf Roughness heading on the Pipes Tab Page and on the GRID Main Pipes Tab Page. Pipes with the Surface Roughness left blank in the column below these defaults will assume the default value.
·   For an individual pipe in the Surface Roughness column on the Pipes Tab Page.