Node Characteristics Report
This report lists detailed information pertaining to each node in the network characterized according to whether it is a sprinkler, nozzle, Hydrant, reference or input point node. Units for each quantity are included in the column headings in accordance with the units selected on the Project Tab Page.
At the top of the table, for each input point the node number, demand and input pressure and elevation is listed.
In the Table:
For each operating sprinkler or nozzle node the following is listed:
Node Number
Node Type – Sprinkler or Nozzle
Calculated Flow
(entered) min Flow
Total Pressure
Normal Pressure – If velocity pressure is included (as requested on the Project Tab)
Elevation of the discharging sprinkler or nozzle
Entered values of k factor and pressure exponent.
For each operating hydrant node the following is listed::
Node Number
Node Type – Hydrant
Calculated Flow
(entered) min Flow
Total Pressure
Normal Pressure – If velocity pressure is included (as requested on the Project Tab)
(entered) Minimum Pressure required for the minimum Flow
(entered) Maximum Pressure allowed for the Hydrant.
Elevation of the discharging hydrant
For each fixed discharge the following is listed:
Node Number
Node Type – Hydrant
Calculated Flow
(entered) min Flow
Total Pressure
Normal Pressure – If velocity pressure is included (as requested on the Project Tab)
Elevation of the fixed discharge
For all other nodes, only the Total Pressure and elevation are listed.
If velocity pressure is included in the calculations, an extra column headed “Normal Pressure” is listed for Sprinklers and Nozzles.