Skip to main content

Equivalent Lengths (metres) used by Program for SSCP52: 2004 - Commercial

# Nominal Diameter of Fitting (mm)
TypeCode2025324050658090100125150200225250300Source
Fittings- based on Medium Wt Steel pipe to AS1074 up to 150mm and ANSI Sch 40 above (HW Coef 120)
Stand.ElbowE1, SE0.60.60.91.21.51.82.12.43.03.74.35.56.106.78.27
L.R.ElbowLE0.30.60.60.60.91.21.51.51.82.42.74.04.454.95.57
45° ElbowE2, HE0.30,30,30.60.60.90.60.61.21.52.12.73.053.44.07
Tees 90° turn and CrossesT1-4,TTC1-40.91.51.82.43.03.74.85.26.17.69.110.711.9515.218.37
Tee St ThruTN, TR No loss
Valves- based on Medium Wt Steel pipe to AS1074 up to 150mm and ANSI Sch 40 above (HW Coef 120)
Gate ValveGV0.30.30.30.30.30.30.30.30.60.60.91.21.35*1.51.81
Check (swing)CV 1.52.12.73.44.34.95.86.78.29.813.715.2*16.819.87
Alarm (swing)AV 1.52.12.73.44.34.95.86.78.29.813.7 16.819.87
MushroomMV        18.0 30.045.0 60.0 7
Check (Butterfly)BV    1.82.13.03.35*3.72.73.03.74.755.86.47
Dry Pipe ValveDV 0.030.060.150.461.073.053.665.496.109.14    4
StrainerSR 0.030.120.230.761.835.186.109.1410.712.221.3   4
Angle ValveNV3.44.05.56.48.29.812.214.416.818.325.032.038.144.451.85
Globe ValveLV6.17.610.412.516.218.624.427.430.836.648.864.076.288.4103.75

 \ Legend for Source:

1 = AS 2118

4 = Data included by Municipal Hydraulics

5 = Crane Co. Catalogue No. 41,

7 = SSCP52\ Note: CPCV Pipes and Fittings are not covered by SSCP52 but if used, NFPA equivalent lengths are assumed.\